Three Dimensional Facial Reconstruction ( Gupta Et Al

Three-Dimensional Facial Reconstruction Similar to the two-dimensional approach, a forensic artist and anthropologist are essential in three-dimensional facial reconstruction (Gupta et al., 2015). Initiating the three-dimensional reconstruction techniques, clay or plastic have been typically used to make replication of skulls (Decker, S., Davy-Jow, S., Faraut, P., Ford, J., Hilbelink, D. Neville, W., 2013). This clay or plastic replication method still utilizes soft facial tissue depth markers in order to determine landmarks of the face (Nelson, L.A. Michael, S.D., 1998). In order to create a replication of the face, pieces of clay or plastic is then placed in-between the landmarks that are identified until the face is filled, or close to being filled (Nelson, L.A. Michael, S.D., 1998). The process of clay or plastic replication producing a three-dimensional approximation of what the individual looks like is outlined in Appendix B. There are multiple approaches to manual three-di mensional facial approximation. According to Gupta et al. (2015) there three subparts to this approach. The first subpart, â€Å"Anthropometrical American Method/ Tissue Depth Method†, is a technique in which â€Å"fine measurements were obtained by the use of needles, X-rays or ultrasound†¦ facial muscles are recorded in proper anatomical manner† (Gupta et al., 2015, 27). A second subpart is the â€Å"Anatomical Russian Method† which was developed by Gerasimov (Gupta et al., 2015, 27). In this application,Show MoreRelatedAdvantages And Disadvantages Of Facial Reconstruction1279 Words   |  6 PagesThis paper will examine the use and application of forensic facial reconstruction. Through topics such as its use in the identification process, discussion of soft tissue thickness, the subjectivity of practitioners, and the reliability and accuracy of these techniques, this paper will hopefully address many strengths and weaknesses found within the practice of forensic facial reconstruction. Description Forensic facial reconstruction is a technique that combines scientific methods and artisticRead MoreProject Mgmt296381 Words   |  1186 Pagesand current. The concepts discussed are relatively simple and intuitive. As you study each chapter we suggest you try to grasp not only how things work, but why things work. You are encouraged to use the text as a handbook as you move through the three levels of competency: I know. I can do. I can adapt to new situations. Project management is both people and technical oriented. Project management involves understanding the cause-effect relationships and interactions among the sociotechnical dimensions

Three Dimensional Facial Reconstruction ( Gupta Et Al

Three-Dimensional Facial Reconstruction Similar to the two-dimensional approach, a forensic artist and anthropologist are essential in three-dimensional facial reconstruction (Gupta et al., 2015). Initiating the three-dimensional reconstruction techniques, clay or plastic have been typically used to make replication of skulls (Decker, S., Davy-Jow, S., Faraut, P., Ford, J., Hilbelink, D. Neville, W., 2013). This clay or plastic replication method still utilizes soft facial tissue depth markers in order to determine landmarks of the face (Nelson, L.A. Michael, S.D., 1998). In order to create a replication of the face, pieces of clay or plastic is then placed in-between the landmarks that are identified until the face is filled, or close to being filled (Nelson, L.A. Michael, S.D., 1998). The process of clay or plastic replication producing a three-dimensional approximation of what the individual looks like is outlined in Appendix B. There are multiple approaches to manual three-di mensional facial approximation. According to Gupta et al. (2015) there three subparts to this approach. The first subpart, â€Å"Anthropometrical American Method/ Tissue Depth Method†, is a technique in which â€Å"fine measurements were obtained by the use of needles, X-rays or ultrasound†¦ facial muscles are recorded in proper anatomical manner† (Gupta et al., 2015, 27). A second subpart is the â€Å"Anatomical Russian Method† which was developed by Gerasimov (Gupta et al., 2015, 27). In this application,Show MoreRelatedAdvantages And Disadvantages Of Facial Reconstruction1279 Words   |  6 PagesThis paper will examine the use and application of forensic facial reconstruction. Through topics such as its use in the identification process, discussion of soft tissue thickness, the subjectivity of practitioners, and the reliability and accuracy of these techniques, this paper will hopefully address many strengths and weaknesses found within the practice of forensic facial reconstruction. Description Forensic facial reconstruction is a technique that combines scientific methods and artisticRead MoreProject Mgmt296381 Words   |  1186 Pagesand current. The concepts discussed are relatively simple and intuitive. As you study each chapter we suggest you try to grasp not only how things work, but why things work. You are encouraged to use the text as a handbook as you move through the three levels of competency: I know. I can do. I can adapt to new situations. Project management is both people and technical oriented. Project management involves understanding the cause-effect relationships and interactions among the sociotechnical dimensions

Three Dimensional Facial Reconstruction ( Gupta Et Al

Three-Dimensional Facial Reconstruction Similar to the two-dimensional approach, a forensic artist and anthropologist are essential in three-dimensional facial reconstruction (Gupta et al., 2015). Initiating the three-dimensional reconstruction techniques, clay or plastic have been typically used to make replication of skulls (Decker, S., Davy-Jow, S., Faraut, P., Ford, J., Hilbelink, D. Neville, W., 2013). This clay or plastic replication method still utilizes soft facial tissue depth markers in order to determine landmarks of the face (Nelson, L.A. Michael, S.D., 1998). In order to create a replication of the face, pieces of clay or plastic is then placed in-between the landmarks that are identified until the face is filled, or close to being filled (Nelson, L.A. Michael, S.D., 1998). The process of clay or plastic replication producing a three-dimensional approximation of what the individual looks like is outlined in Appendix B. There are multiple approaches to manual three-di mensional facial approximation. According to Gupta et al. (2015) there three subparts to this approach. The first subpart, â€Å"Anthropometrical American Method/ Tissue Depth Method†, is a technique in which â€Å"fine measurements were obtained by the use of needles, X-rays or ultrasound†¦ facial muscles are recorded in proper anatomical manner† (Gupta et al., 2015, 27). A second subpart is the â€Å"Anatomical Russian Method† which was developed by Gerasimov (Gupta et al., 2015, 27). In this application,Show MoreRelatedAdvantages And Disadvantages Of Facial Reconstruction1279 Words   |  6 PagesThis paper will examine the use and application of forensic facial reconstruction. Through topics such as its use in the identification process, discussion of soft tissue thickness, the subjectivity of practitioners, and the reliability and accuracy of these techniques, this paper will hopefully address many strengths and weaknesses found within the practice of forensic facial reconstruction. Description Forensic facial reconstruction is a technique that combines scientific methods and artisticRead MoreProject Mgmt296381 Words   |  1186 Pagesand current. The concepts discussed are relatively simple and intuitive. As you study each chapter we suggest you try to grasp not only how things work, but why things work. You are encouraged to use the text as a handbook as you move through the three levels of competency: I know. I can do. I can adapt to new situations. Project management is both people and technical oriented. Project management involves understanding the cause-effect relationships and interactions among the sociotechnical dimensions

Three Dimensional Facial Reconstruction ( Gupta Et Al

Three-Dimensional Facial Reconstruction Similar to the two-dimensional approach, a forensic artist and anthropologist are essential in three-dimensional facial reconstruction (Gupta et al., 2015). Initiating the three-dimensional reconstruction techniques, clay or plastic have been typically used to make replication of skulls (Decker, S., Davy-Jow, S., Faraut, P., Ford, J., Hilbelink, D. Neville, W., 2013). This clay or plastic replication method still utilizes soft facial tissue depth markers in order to determine landmarks of the face (Nelson, L.A. Michael, S.D., 1998). In order to create a replication of the face, pieces of clay or plastic is then placed in-between the landmarks that are identified until the face is filled, or close to being filled (Nelson, L.A. Michael, S.D., 1998). The process of clay or plastic replication producing a three-dimensional approximation of what the individual looks like is outlined in Appendix B. There are multiple approaches to manual three-di mensional facial approximation. According to Gupta et al. (2015) there three subparts to this approach. The first subpart, â€Å"Anthropometrical American Method/ Tissue Depth Method†, is a technique in which â€Å"fine measurements were obtained by the use of needles, X-rays or ultrasound†¦ facial muscles are recorded in proper anatomical manner† (Gupta et al., 2015, 27). A second subpart is the â€Å"Anatomical Russian Method† which was developed by Gerasimov (Gupta et al., 2015, 27). In this application,Show MoreRelatedAdvantages And Disadvantages Of Facial Reconstruction1279 Words   |  6 PagesThis paper will examine the use and application of forensic facial reconstruction. Through topics such as its use in the identification process, discussion of soft tissue thickness, the subjectivity of practitioners, and the reliability and accuracy of these techniques, this paper will hopefully address many strengths and weaknesses found within the practice of forensic facial reconstruction. Description Forensic facial reconstruction is a technique that combines scientific methods and artisticRead MoreProject Mgmt296381 Words   |  1186 Pagesand current. The concepts discussed are relatively simple and intuitive. As you study each chapter we suggest you try to grasp not only how things work, but why things work. You are encouraged to use the text as a handbook as you move through the three levels of competency: I know. I can do. I can adapt to new situations. Project management is both people and technical oriented. Project management involves understanding the cause-effect relationships and interactions among the sociotechnical dimensions

Three Dimensional Facial Reconstruction ( Gupta Et Al

Three-Dimensional Facial Reconstruction Similar to the two-dimensional approach, a forensic artist and anthropologist are essential in three-dimensional facial reconstruction (Gupta et al., 2015). Initiating the three-dimensional reconstruction techniques, clay or plastic have been typically used to make replication of skulls (Decker, S., Davy-Jow, S., Faraut, P., Ford, J., Hilbelink, D. Neville, W., 2013). This clay or plastic replication method still utilizes soft facial tissue depth markers in order to determine landmarks of the face (Nelson, L.A. Michael, S.D., 1998). In order to create a replication of the face, pieces of clay or plastic is then placed in-between the landmarks that are identified until the face is filled, or close to being filled (Nelson, L.A. Michael, S.D., 1998). The process of clay or plastic replication producing a three-dimensional approximation of what the individual looks like is outlined in Appendix B. There are multiple approaches to manual three-di mensional facial approximation. According to Gupta et al. (2015) there three subparts to this approach. The first subpart, â€Å"Anthropometrical American Method/ Tissue Depth Method†, is a technique in which â€Å"fine measurements were obtained by the use of needles, X-rays or ultrasound†¦ facial muscles are recorded in proper anatomical manner† (Gupta et al., 2015, 27). A second subpart is the â€Å"Anatomical Russian Method† which was developed by Gerasimov (Gupta et al., 2015, 27). In this application,Show MoreRelatedAdvantages And Disadvantages Of Facial Reconstruction1279 Words   |  6 PagesThis paper will examine the use and application of forensic facial reconstruction. Through topics such as its use in the identification process, discussion of soft tissue thickness, the subjectivity of practitioners, and the reliability and accuracy of these techniques, this paper will hopefully address many strengths and weaknesses found within the practice of forensic facial reconstruction. Description Forensic facial reconstruction is a technique that combines scientific methods and artisticRead MoreProject Mgmt296381 Words   |  1186 Pagesand current. The concepts discussed are relatively simple and intuitive. As you study each chapter we suggest you try to grasp not only how things work, but why things work. You are encouraged to use the text as a handbook as you move through the three levels of competency: I know. I can do. I can adapt to new situations. Project management is both people and technical oriented. Project management involves understanding the cause-effect relationships and interactions among the sociotechnical dimensions

Regulating Interest Rates as a Solution to the Recession...

Today’s financial crisis has deeply impacted all areas of life not only in the United States, but also the rest of the world. Company giants such as Circuit City ® and Merrill Lynch ® have fallen victim to the financial crisis. One of the biggest industries the financial crisis has had an impact on has been the housing market. Everyday newspapers, journal articles, and television media cover stories regarding foreclosures around the country. To regain financial control of the world and domestic economy, one must begin with the housing market. There are various areas of the housing market, which allow for overhaul and maintain a prosperous future. Regulating bank interest rates and federal interest rates will reduce, if not eliminate the†¦show more content†¦By repaying their debt, this helps the banking industry, which in turn strengthens the economy. This is a win-win situation because everyone benefits from it: the consumer improves his or her credit worthiness in order to purchase a home at a later time, the banking industry does not lose out on loaned money in either the short or long term, and home buyers will be able to enter an agreement with the lender knowing beforehand that their interest rate will not rise at any point, thus making it affordable. For people who are currently in an ARM, the banking industry should allow them to transfer to a fixed-rate loan that allows affordability to the consumer without jeopardizing loss of money on the banking industry. The banking industry should also be flexible regarding requests by its home owners. Some people are beginning to realize ahead of time that eventually they will not able to afford the house they are living in. One solution might be to allow the flexibility such as lowering payments for a specified amount of time such as one or two years. Affordability is the main idea to a homeowner. If a mortgage is affordable, most likely a homeowner will continue to make his or her payments o n time and not foreclose on the home. For example, if a person is paying $1,000 per month in mortgage and is not able to afford this amount, by allowing them to reduce their payments to $800 on a two-year agreement, the bank will temporarily loseShow MoreRelatedInsight From Theory And History1638 Words   |  7 Pagesaddition to borrowing money in an effort to slow the recession, the government used strategies of classical economic theory proposed by Adam Smith. One of the main ideas of Classical economic theory is to reduce the amount of spending by the government in and effort to balance the budgets. In response to these efforts of the government to restore the economy John Maynard Keynes laid out his economic ideas in the book The General Theory of Employment, Interest and Money. He critiques the ideas of classicalRead MoreAnalysis of â€Å"the Global Financial Crisis: Causes, Effects, Policies and Prospects† Dominick Salvatore, Journal of Politics Society, Columbia University1110 Words   |  5 Pagespossib le to avoid the recession: introduced stimulus packages, lowered interest rates, capitalized banks but, their efforts only succeeded in preventing a deeper recession or depression. The outcome of the last financial crisis is evident to all: stock markets crashed all over the world in 2008, the capitalization of banks was cut by more than half, the entire U.S. investment banking sector as we had known it disappeared, all advanced countries fell into the â€Å"Great Recession† (the deepest of the post-warRead MoreThe Great Depression Of The 1930 S1476 Words   |  6 PagesMy research paper will compare and contrast the great depression of the 1930’s and the great recession in the United State of America. First, I’ll make a general overview of each of these two different periods and then focus on certain specific aspects during these different times. This will include the causes to the economic recessions witnessed, impacts of the economic recessions and the solu tions that were introduced. When talking about any topic regarding American history, it would be hard notRead MoreThe Central Banking Authority Of The United States And Is Responsible For Regulating Monetary Policy Essay1459 Words   |  6 PagesThe Federal Reserve is the central banking authority of the United States and is responsible for regulating monetary policy. The Federal Reserve’s main goal is to focus on price stability when creating monetary policies. Along with this, they must also keep in mind high employment and output stability, economic growth, stability of financial markets, interest-rate stability and stability in foreign exchange markets. They do this with the intention to help the economy as a whole, not one specificRead MoreMonetary Vs. Fiscal Policy1012 Words   |  5 Pagescomes time to decide on what actions we want to take, whether they are monetary or fiscal. Monetary policy is the process of the monetary authorities of a country primarily controlling the supply of money available, often targeting a certain rate of interest for the main purpose of promoting economic growth and stability. The Main Official goals usually include relatively stable prices with low unemployment. Discretionary monetary policy on the other hand, uses the Federal Reserve to increase theRead MoreUnderstanding Capitalism And The Need For Government Intervention2114 Words   |  9 Pagesof John Maynard Keynes in The General Theory of Employment, Interest, and Money, we can better understand how a capitalistic system functions, how it should function properly with or without government intervention, and how these perspectives fit within the context of international economic history. The market system is defined as having no central guidance, just a system of producing and exchanging goods, motivated by personal interests. In A Wealth of Nations, Adam Smith focused on the increasingRead MoreThe Problem Of The Student Loan Bubble990 Words   |  4 Pagesgetting worse. College is supposed to be an avenue to allow students to explore interests and prepare themselves to eventually enter into the workforce after graduating and for adult life in gerenal. (Hofstra mission statement) In recent years, the ladder has not held true, and the increasing debt on student borrowers does not it make it any easier. Many recent graduates are still feeling the sting of the 2008 recession in the job market. Although the market is steadily improving, average wagesRead MoreAnalysis Of The Article Eurozone s Inflation1909 Words   |  8 PagesThe article â€Å"Eurozone’s Drop In Inflation Carries More Fears Of Another Recession† from the New York Times, written by Jack Ewing, discussed of how inflation has dropped in the Eurozone to its lowest rate for nearly five years and the threat of Europe falling into deflation leading to another recession. The optimal or ideal inflation rate for Europe is at 2% and with its inflation rate dropping down to alm ost 0% borderline, more pressure is being added to the Europe Central Bank. Europe must comeRead MoreAnalysis of New Ideas from Dead Economists Essay1261 Words   |  6 Pagesgrow and become what it is today. Economics started with the ideas of Adam Smith. He is credited as the first true economist. He had never taught nor took a class in economics. In his book The Wealth of Nations Smith alludes to the idea that self interest motives allows a nation to prosper entirely. People do something in order to gain something. Without any gain, people would be hesitant to start business or political ventures. These acts of selfishness make for a successful nation. From this ideasRead MoreGovernment s Role Of Managing Instability2340 Words   |  10 PagesUnemployment increases, the rate of inflation rises faster than it should etc. All these factors combined bring short-run instability in an economy. All of these elements play a major role in creating economic issues in a country (Trading Economics, 2016). Generally, every country has their own rules and regulations to control all these economic factors. If the rate of inflation increases excessively then it gradually increases the level of unem ployment by creating an economic recession (Leijonhufvud, 2000)

Business Ethics Virtue Ethics Resource

Question: Describe about the Business Ethics for Virtue Ethics Resource. Answer: Introduction This study has been aimed to the concept of ethics of a business. In this case, this study has been chosen a company namely Belgium Brewing Company. The sustainable social responsibility of this company has been discussed. Moreover, this study has tried to demonstrate the environmental issues, which have been addressed by the mentioned company. In this purpose, it can be observed that New Belgium Brewing is willing to focus to the consumption of energy (Audi 2012). On the other hand, New Belgium Brewing has been aimed and followed three Rs strategy in order to reduce the carbon do oxide emission. This study is also helpful to identify the reason why this organisation has been taken the greatest stance regarding the sustainability. As a result, it can be recognised that New Belgium Brewing can focus to the entire business supply chain approach (Bardy, Drew and Kennedy 2012). In order to discuss the competitive advantage of this company, this study has demonstrated that this company has aimed to maintain the brand and good quality in its production process. This reflects the business to maintain and hold better position compared to the other companies (Becker 2012). On the other hand, this study is helpful to identify and understand the New Belgium Brewing's actions and indicatives. In this purpose, this study has demonstrated that the company has aimed to develop a long term relationship with the consumers of the business. On the other hand, this study has aimed to develop the ethical culture, which can be significantly discussed the company's social responsible behaviour of the business (Beverungen, Dunne and Hoedemaekers 2013). What environmental issues does the New Belgium Brewing Company work to address? How does New Belgium Brewing Company taken a strategic approach to addressing these issues? Discuss the reason why the company has been taken a strong stance toward sustainability According to DesJardins and McCall (2014), New Belgium Brewing company would like to focus to the energy consumption along with the wastage of landfill, water utilisation and its wastage, It also addressed to the emission of the green house gas, which has been produced by the production procedure (Bardy, Drew and Kennedy 2012). New Belgium Brewing included the specified strategic approach, which can address the issues such as cost efficient as well as the energy saving factors in order to conduct the organisational business. As a result, the business can effectively reduce the effect of the atmosphere. In this connection, Dunfee and Nagayasu (2013) opined that this company mainly focused to the reduction of the carbon dioxide emission and therefore, it took the help of wind power, which could effectively diminish the carbon dioxide emission. Therefore, it can be identified that the biggest personal array of solar energy in Colorado could manufacture approximately 200 kilowatts of pow er. In addition, these capabilities could effectively reduce the consumption of energy. On the other hand, in the words of Edum-Fotwe and Thorpe (2015), New Belgium Brewing considered the steam condenser in order to utilise the hot water in the manufacturing procedure. This reutilisation of the warm water is useful for the extra brewing and also for heating the tiles of the floors. The energy of New Belgium Brewing is used for brewing the kettle as well as lightens up the facilities in order to minimise the overall using of the energy resources at the time of the peak hours. On the other hand, Giacalone and Promislo (2013) pointed that New Belgium Brewing seeks to lower down the effect on the environment. Therefore, New Belgium Brewing devoted into the wind turbine. New Belgium Brewing has implemented a steam condenser, which can capture and can reutilise warm water in order to boil the barley (Gupta 2014). More precisely, it can be concluded that New Belgium Brewing aimed to address three basic environmental issues. These issues are cost efficient energy and the energy saver, which can formulate the business of New Belgium Brewing and can diminish the effect on the atmosphere. The other two issues are such as recycling and the reuse, and the green development process. In order to control these three mentioned environmental issues, Hartman, DesJardins and MacDonald (2014) mentioned that New Belgium Brewing has been initiated three Rs whereas three R include the reduce, reutilisation and the recycle. As per these three R principles, New Belgium Brewing ha s started the uses of wind turbine as it can effectively diminish the emissions of carbon di oxide gas (Hoffman, Frederick and Schwartz 2014). On the other hand, New Belgium Brewing bought kettle as well as store-spent barley, so that the local farmers can get the benefit. After that, these local farmers feed their pigs or to the other animals (Hartman, DesJardins and MacDonald 2014). Next, they turn the wastewater for utilisation. With this water, they used it for harvested fish food. As a result, the employees of New Belgium Brewing would get the benefit as they get the permission of using the alternatives transportation. In the points of Holland and Albrecht (2013), New Belgium Brewing was able to achieve the sustainability and can recycles approximately 9 percent of the overall wastages. Lastly, the mentioned organisation tried to enhance the capacity of canning by approximately 6 times. In this context, it can be mentioned that each of the canning capacity is able to inject low er rate of carbon di oxide (Jennings 2014). On the other hand, in order to save water, New Belgium Brewing apply a strategy for which New Belgium Brewing can enhance the methane gas. In addition, it can be observed that with this approach only 20 percent less water can be used compared to the other brewing organisations. In this case, New Belgium Brewing can decrease the wastages during the manufacturing process. Instead of this, Koslowski (2013) added that the wastages bottles can be recycled during the manufacturing procedure. In a synopsis, after analysis the scenario, it can be stated that the dissatisfaction level of the employees can be identified and based on this study, the environmental issues have been addressed, through which the employees satisfaction level can be improved. In this connection, Lampe and Engleman-Lampe (2012) opined that to make a profitable brewery, New Belgium Brewing organisation has aimed to the core valuation. In addition, New Belgium Brewing has focused to the world-class beer production. In this respect, New Belgium Brewing Company has focused to the quality of the products and adapted new, efficient and innovative technique. According to Martin and Parmar (2012), New Belgium Brewing has considered the strong stance towards sustainability in order to enrich the society as well as to the business environment. This could lead a successful business to pay off in the long run. In addition, in order to motivate the organisations overall supply chain, New Belgium Brewing has appl ied sustainability purchasing techniques. These techniques help the business to identify the eco friendly suppliers (Nica 2013). After the identification, the business would be able to work with the suppliers to maintain the eco friendly sustainability during the overall value chain approach. As is can be observed that the employees of New Belgium Brewing are looking for the zero emissions, therefore, Nicolaescu (2013) mentioned that sustainable business would reflect the business environments cycle and the industry. On the other hand, it can be stated that New Belgium Brewing could minimise the entire resource consumption as well as could maximise the allocation of energy. After that, the recycling of the wastage materials could be proceeded (Hoffman, Frederick and Schwartz 2014). Discuss the reason whether New Belgium has been focused on social responsibility provides a competitive advantage for the company In the points of Rutherford et al. (2012), it can be stated that New Belgium Brewing has aimed to the social responsibility and it provided the key competitive advantage to the organisation. In this connection, it can be mentioned that New Belgium Brewing has focused to the performance of the social performance (Bardy, Drew and Kennedy 2012). The business has been seeking to improve the communities. In this purpose, the company tried to increase the live of the citizens with the help of the different factors such as event sponsorship, philanthropic involvement and therefore, the company can earn 1 per cent of profit (Santoro and Strauss 2012). In addition, New Belgium Brewing tried to maintain community Bulletin board in order to identify the community's problem. Moreover, this bulletin board is also helpful to understand the difficulties regarding the community involvement functions as well as the proposals. Therefore, Su (2014) opined that New Belgium Brewing is familiar for two factors. The first factor is high quality and the second factor is commitment regarding sustainability. On the other hand, it can be stated that New Belgium Brewing provide the business a competitive advantage. As a result, it can be demonstrated that the customers are looking for the good and high quality of products what they want to purchase. Trong Tuan (2012) identified that the most important asset of New Belgium Brewing is its position and its image. This image is seemed to be beneficial in order to maintain the belief of its consumers that the company maintain its quality as well as the responsibility towards the business (Weiss 2014). For these reasons, it can be concluded that New Belgium Brewing has been experiencing more competitive advantage relative to the other business. On the other hand, New Belgium Brewing tried to maintain the greater quality of brand in its manufacturing procedure. The manufacturing products by the company are environmental friendly. As per the statement of West (2014), New Belgium Brewing is at the first position among the eco friendly business industry. Moreover, it can be observed that in order to maintain the position, New Belgium has organised organisational meeting (Beverungen, Dunne and Hoedemaekers 2013). In this meeting, the employees, managers and the workers have tried to discuss the sustainability ideas, the stock of the natural resources which is helpful to make the business. New Belgium Brewing has aimed to improve the skills of the employees as well as the workers and also tried to learn new approaches and techniques (Bardy, Drew and Kennedy 2012). This company also endeavoured the cost efficient and energy saving strategy in order to generate the business. The company can also reduce the adverse impact into the e nvironment. This also helps to raise the core valuation, business ethics (Beverungen, Dunne and Hoedemaekers 2013). As a result, the workers are willing to invest in the wind turbine and it can be stated that New Belgium Brewing has acquired the first position in the United Stated as wind powered brewery. According to DesJardins and McCall (2014), New Belgium Brewing is helpful to estimate the non essential operational activities and is able to save the power (Giacalone and Promislo 2013). The system and the operational function of the can capture the waste water. In addition, with the help of this system, the company can provide the brewery power necessity and can reduce the strain to the local municipal water. Furthermore, Dunfee and Nagayasu (2013) cited that New Belgium Brewing has followed the green building technology. In the year of 2002, the sun tubes as well as the day lighting reflects to reuse to heat the Brew houses (DesJardins and McCall 2014). As a result, it can be mentioned that New Belgium Brewing has aimed to hold a significant position and is able to achieve the sustainability. The business objective of this company is to utilise 3.5 gallons water in order to prepare 1 gallon beer. Giacalone and Promislo (2013) added that this amount is lower compared to the other brewing companies. In addition, New Belgium Brewing recycles the wastes approximately 99.9 per cent and from the renewable resources, around 100 per cent of the electricity has been come. New Belgium Brewing implements the life cycle measurements, which in turn is helpful to estimate the packaging components (Hartman, DesJardins and MacDonald 2014). Discuss whether New Belgiums actions and initiatives are indicative of a socially responsible corporation It can be seen that New Belgium Brewing has been suffering from the increased competition with the other brewing companies. New Belgium faced the competition against the traditional breweries (Hoffman, Frederick and Schwartz 2014). Therefore, New Belgium Brewing is able to engage with the environmental scanning. In addition, this company also has the competitive advantage, which is beneficial during the time of the competition around the improving competitive atmosphere. On the other hand, New Belgium Brewing required to belief the core valuation at the time of improvement. In order to discuss the reason, Holland and Albrecht (2013) mentioned that this specific company does not need to lose the aim when the competition is seemed to strong. Therefore, it can be stated that New Belgium Brewing requires to maintain a long term relationship with the consumers and for this the company can establish the consumer intimacy as well as can focus to the social responsibility in case of the making of superior beer. Moreover, Lampe and Engleman-Lampe (2012) added that although New Belgium has tried to maintain the brand image in terms to the creation of company's social responsibility, this company has achieved the Environmental achievement award. It is helpful to motivate the business of the company (Edum-Fotwe and Thorpe 2015). As a result, this in turn reflect the company to improve the performance of the business. Moreover, New Belgium Brewing can easily achieve the business objectives and can reach to the goal. In the words of Martin and Parmar (2012), instead of the improvement in environmentally friendly techniques, this company tried to improve and increase the communities as well as the live of the people. Hence, the workers of the company has focused to maintain a partnership with the humanity in order to develop the building. The employees who lost their house, can live there (Santoro and Strauss 2012). The funding decisions have been taken by the philanthropy committee of New Belgium Brewing include the production workers. In addition, this company is also looking for the non profit organisation. This in turn able to focus to the creativity along with the diversity and innovative technique as it will be helpful to accomplish the business goals, objectives and business mission. As per the statement of Trong Tuan (2012), the philanthropy committee reflects to the incorporated community involvement into the business of the company at their manufacturing procedure. On the other hand, Lampe and Engleman-Lampe (2012) mentioned that New Belgium Brewing also supports the number of events, which helps to the employees to improve the involvement and it can also minimise the environmental damages. Moreover, Holland and Albrecht (2013) mentioned that the company's success also depend upon the role of the workers. This section is helpful to recognise whether the company is socially responsible or not. Therefore, it can be observed that the organisation is concerned about the citizenship within the communities and make a strong bond with the customers (Hoffman, Frederick and Schwartz 2014). Instead of this, New Belgium has tried to maintain the corporate social responsibility, which is helpful to enhance the momentum. This would effectively increase the valuation of the business of the company. According to Hartman, DesJardins and MacDonald (2014), New Belgium Brewing has followed the triple bottom line technique in the manufacturing process. This traditional bottom line technique is able to estimate how the business is successful or not. In this connection, it is necessary to evaluate the performance of the business. Furthermore, the financial performance reflect to estimate the position of the business. In this respect, Martin and Parmar (2012) added that New Belgium Brewing has also show it's interest in order to recognise the profitability statement, working capacity etc. The employees also tried to perform highly in order to develop the organisational vision and accountability. In addition, the workers are provided organisational training in order to recognise the manufacturing procedure (Dunfee and Nagayasu 2013). Conclusion This study is helpful to understand the concept of business ethics. In this purpose, this study has been considered New Belgium Brewing company. This study is also very important to understand the business culture and environment of the mentioned company. Firstly, this study has focused to the environmental issues of New Belgium brewing company in order to address the working capacity. In this connection, this study has identified that the company developed and followed three R's strategy. The environmental issues are the cost efficiency level, which can conserve the energy. On the other hand, to diminish the environmental issues, the company has adapted the recycling and the green building approaches, which has been discussed in this study. As a result, this study is beneficial to discuss the strategic approach, which can effectively address the mentioned issues. In a synopsis, it can be stated that New Belgium Brewing mainly focus to reduce the emission of carbon di oxide. On the other hand, this study is helpful to identify the social responsibility, which can significantly discuss the key competitive advantage of the organisation. In this purpose, after the analysis, it can be observed that New Belgium Brewing focused to the greater quality and the commitment regarding the sustainability. After the analysis, it can be also observed that the company has aimed to provide facilities for the employees. New Belgium Brewing has higher competitive advantage compared to the other companies. Lastly, this study is helpful to identify the social activities and roles, which is important to understand the New Belgium company's actions. Reference Audi, R., 2012. Virtue ethics as a resource in business.Business Ethics Quarterly,22(02), pp.273-291. Bardy, R., Drew, S. and Kennedy, T.F., 2012. Foreign investment and ethics: How to contribute to social responsibility by doing business in less-developed countries.Journal of Business Ethics,106(3), pp.267-282. Becker, G.K. ed., 2012.Ethics in business and society: Chinese and western perspectives. Springer Science Business Media. Beverungen, A., Dunne, S. and Hoedemaekers, C., 2013. The financialisation of business ethics.Business Ethics: A European Review,22(1), pp.102-117. DesJardins, J.R. and McCall, J.J., 2014.Contemporary issues in business ethics. Cengage Learning. Dunfee, T.W. and Nagayasu, Y. eds., 2013.Business ethics: Japan and the global economy(Vol. 5). Springer Science Business Media. Edum-Fotwe, B.G.K.F. and Thorpe, A.P.T., 2015. The application of causality to construction business ethics.business ethics,10(3), pp.550-568. Giacalone, R.A. and Promislo, M.D., 2013. Broken when entering: The stigmatization of goodness and business ethics education.Academy of Management Learning Education,12(1), pp.86-101. Gupta, A.D., 2014. Ethics in Business Practice: Accounting. InBusiness Ethics(pp. 115-129). Hartman, L.P., DesJardins, J.R. and MacDonald, C., 2014.Business ethics: Decision making for personal integrity and social responsibility. McGraw-Hill. Hoffman, W.M., Frederick, R.E. and Schwartz, M.S. eds., 2014.Business ethics: Readings and cases in corporate morality. John Wiley Sons. Holland, D. and Albrecht, C., 2013. The worldwide academic field of business ethics: Scholars perceptions of the most important issues.Journal of business ethics,117(4), pp.777-788. Jennings, M.M., 2014.Business ethics: Case studies and selected readings. Cengage Learning. Koslowski, P. ed., 2013.Contemporary economic ethics and business ethics. Springer Science Business Media. Lampe, M. and Engleman-Lampe, C., 2012. Mindfulness-based business ethics education.Academy of Educational Leadership Journal,16(3), p.99. Martin, K. and Parmar, B., 2012. Assumptions in decision making scholarship: Implications for business ethics research.Journal of Business Ethics,105(3), pp.289-306. Nica, E., 2013. Social Responsibility, Corporate Welfare, and Business Ethics.Psychosociological Issues in Human Resource Management,1(1), pp.9-14. Nicolaescu, E., 2013. Business Ethics, Corporate Governance, and Social Responsibility.Psychosociological Issues in Human Resource Management,1(1), pp.86-93. Rutherford, M.A., Parks, L., Cavazos, D.E. and White, C.D., 2012. Business ethics as a required course: Investigating the factors impacting the decision to require ethics in the undergraduate business core curriculum.Academy of Management Learning Education,11(2), pp.174-186. Santoro, M.A. and Strauss, R.J., 2012.Wall street values: business ethics and the global financial crisis. Cambridge University Press. Su, H.Y., 2014. Business ethics and the development of intellectual capital.Journal of Business Ethics,119(1), pp.87-98. Trong Tuan, L., 2012. The linkages among leadership, trust, and business ethics.Social Responsibility Journal,8(1), pp.133-148. Weiss, J.W., 2014.Business ethics: A stakeholder and issues management approach. Berrett-Koehler Publishers. West, A., 2014. Ubuntu and business ethics: Problems, perspectives and prospects.Journal of Business Ethics,121(1), pp.47-61.'